How do I apply the smellBgone?
We have two forms of smellBgone, liquid and infill.
The infill form is available in 15KG bags and is very similar to sand in appearance. The infill is ideal for all synthetic turf surfaces and can be used instead of, or in combination with normal sand infill. Spread the smellBgone infill over the affected area evenly, at the recommended ratios. Using a stiff bristled hand broom, gently work smellBgone infill against the turf until it disappears into the bottom of the thatch fibres.
Please note that whilst smellBgone is safe for humans and pets, it is recommended you use an anti-dust respirator safety face mask to prevent inhalation of any dust particles.
smellBgone liquid is available in 2lt, 5lt and 15lt concentrate containers. The liquid product is ideal for all hard surfaces particularly commercial spaces. Simply dilute with water to the recommend ratio and apply via a watering can or sprayer unit.
Is smellBgone harmful?
smellBgone infill is the product of a naturally occurring organic group of minerals that are basically hydrated calcium potassium sodium aluminosilicates in which water and Urine, is held in cavities in the lattice. smellBgone infill absorbs the ammonia, substantially neutralising and reducing smells. It is not harmful to pets or animals.
smellBgone liquid is a non-toxic and environmentally friendly anti-bacterial detergent ideal for the cleaning and sanitising of bacteria sensitive surfaces. It will effectively deodorise and eliminate the odour source, not simply ‘mask’ the problem.
How often do I need to reapply smellBgone?
smellBgone will stay active in the surface, there should be no need to replace or reinstall the product unless due to an area of extreme wear.
Does it help cool the turf?
Both the smellBgone infill and CoolTech Infill will help cool the turf surface. Independent laboratory testing has shown the turf surface consistently cooled by 15c with the addition of either product.
How much product do I need?
This varies according to the product and surface to which it is being applied to. Each product page has recommended ratios. If still unsure contact our sales team at email@example.com
Can I apply these products to existing turf surfaces?
Yes, you can apply both the infill and liquid products to existing surfaces or install to a new synthetic turf installation. If installing to a new surface the amount of sand infill can be reduced or replaced and simply use the smellBgone infill product.
Where can I use smellBgone?
smellBgone can be used on any surface where there is an odour issue.
- Surfaces such as concrete, fabric, carpets, wooden floors as well as tiled surfaces
- Sports fields
- Retirement villages
- Synthetic lawns
- Change rooms
- Hospital wards
- Wash rooms
- Sick bays
- Dog runs/play areas
- Veterinary hospitals
- Pet grooming centres